White Knight Rust Guard® Quick Dry Advanced Enamel

500ml, 1L, 4L

Quick drying water based topcoat



Features

• 8 year guarantee^

• Quick Dry- Touch dry in 30 minutes, re-coat in 2 hours*

• Easy 1 step application – no primer required for new or lightly rusted structural steel

• Excellent adhesion, durability and opacity

• Low odour

• Available in both gloss and satin tintable bases

• Satin finish matches COLORSTEEL®

• Tintable to 1000s of colours including COLORSTEEL® and PPG Paints®.

^ Please refer to the warranties & disclaimer section

* At an average temperature of 25°C , relative humidity 50%

COLORSTEEL® is a registered trademark of New Zealand Steel Limited.

White Knight Rust Guard® Quick Dry Advanced Enamel may be used on all metal surfaces. Ideal for use on metal fences, roofs, doors, gutters, downpipes, windows, railings and gates

1. PREPARATION

  • Remove all loose rust and flaking paint by wire brushing.
  • Sand new metal, previously painted or glossy surfaces thoroughly.
  • The surface must be clean, dry and free from dust, dirt, grease, oil, rust scale and other contaminants.
  • Treat rusted surfaces with White Knight Rust Guard® Rust Converter.
  • Prime galvanised iron, ZINCALUME®* and non-ferrous metals e.g. aluminium with White Knight Rust Guard® SLS Etch Primer or White Knight Rust Guard® Quick Dry True Bite.

In severe conditions, or if heavily rusted, prime steel and wrought iron with White Knight Rust Guard® Quick Dry True Bite or White Knight Rust Guard® Metal Primer.

2. APPLICATION

  • Stir thoroughly with a broad, flat stirrer in a circular lifting motion for at least 5 minutes before use and continue to stir at regular intervals during application.
  • Apply 2 coats by brush, roller or spray gun.

DO NOT USE AT TEMPERATURES BELOW 10°C OR ABOVE 35°C

3. COVERAGE

Approximately 16m² per litre, depending on the nature of the surface.

4. DRYING

  • Touch dry in 30 minutes. Re-coat after 2 hours.
  • Drying will be slower in cold or humid conditions, in the absence of ventilation or where heavy film builds are applied.

5. CLEAN UP

Clean brushes and equipment with water immediately after use.

6. SAFETY & FIRST AID

KEEP OUT OF REACH OF CHILDREN.

  • Keep lid on when not in use.
  • If swallowed - Drink plenty of water. Always seek medical advice.
  • Eye contact - Flush with plenty of water. Always seek medical advice.
  • Skin contact - Wash with soap and water. Always seek medical advice.

For 24 hour medical emergency response in Australia call 1800 883 254 and in New Zealand call 0800 000 096

7. ENVIRONMENT

  • Do not pour unwanted paint down the drain.
  • Keep unwanted paint in sealed containers for disposal via chemical waste collections.
  • Empty waste containers should be left open in a well ventilated area to dry out. When dry, recycle steel containers via steel recycling programs.
  • Disposal of empty paint containers via domestic recycling programs may differ between local authorities. Check with your council first.

*ZINCALUME® is a registered trademark of Bluescope Steel Limited.


Colour Range

Rust Guard® products include popular pre-tinted colours as well as bases that maybe tinted to 1000s of PPG Paints® colours.

For more colour options visit the PPG Paints® website. Click here

Colours
Flat White
Satin White
Gloss White
Thin Ice Old
Platonic Old
Grey Ghost Old
Vintage Lace Old
Colorbond Paperbark
Clear Atrium Old
Colorbond Evening Haze
Golden Yellow
Smokey Mood Old
Icy Bay (1)
Colorbond Surfmist
Secret Passage Old
Riley Ash
Silver Dollar Old
Almond Friand
Mighty Mink Old
Colorbond Wilderness
Red Licorice
Crystal Crush - Old
Cold Steel Old
Colorbond Shale Grey
Old China
Pebble Grey
Colorbond Dune
Classic Cream
Colorbond Gully
Stonewash Old
Colorbond Cove
Flame Red
Thundercloud
Shindig Old
Grey Bonnet
Cookie Jar
Colorbond Sandbank
Colorbond Jasper
Marine Blue
Rainforest
Colorbond Bushland
Terracotta
Charcoal Smoke
Colorbond Windspray
Colorbond Basalt
Colorbond Ironstone
Spicy Pepper
Colorbond Terrain
Elegant evening
Colorbond Cottage Green
Colorbond Pale Eucalypt
Manor Red
Woodland Grey
Machinery Grey
Colorbond Wallaby
Rain Barrel
Colorbond Deep Ocean
Brunswick Green
Colorbond Mangrove
Indian Red
Flat Black
Satin Black
Gloss Black
Colorbond Night Sky
Colorbond Monument
Buffalo Brown
Aluminium
Blue
Silver
Charcoal
Gunmetal
Thunder Storm Old
Teal Blue
Platinum Grey
*Due to colour variations in all browser types, the displayed colour palettes are a representation only of the actual colour. This should not be used in deciding the colour range suitable for you application.

Need Help?

It’s as easy as selecting a project type and the material involved